How do I replace my Apple TV screen?

Introduction:

The Apple TV is a great little device, but it can be frustrating to use. The screen on your Apple TV must be replaced from time to time due to wear and tear or other issues. This article shows how to replace your Apple TV screen and includes tips so that you can do this yourself without damaging any parts!

To replace the Apple TV that you purchased from a third party, download and install an iOS device on your computer. Connect it to the same Wi-Fi network as the Apple TV and open iTunes on the iPad. If you have a previous version of iTunes installed on your computer, you might need to uninstall it before installing later versions.

This article shows how to replace your Apple TV screen. You will need a screwdriver and a new screen to complete the operation.

This article shows how to replace your Apple TV screen. You will need a screwdriver and a new screen to complete the operation. If you can’t find information on replacing your Apple TV in the manual, check out our video guides below!

Gather your tools and get comfortable.

• Gather your tools and get comfortable.
• You will need a screwdriver, which you can use to remove the screws that hold your Apple TV screen in place. If you don’t have one, you can use any small flathead or Philips head screwdriver for this job.
• You should also have a dry cloth or paper towel handy to clean the screen before you put it back in place; otherwise, dust may adhere to its surface and cause problems with future operations (such as adding new content). Be sure not to damage anything while doing so!

Remove the rubber feet from the bottom of your Apple TV. They should come off easily.

• Remove the rubber feet from the bottom of your Apple TV. They should come off easily, but if not, use a small screwdriver to pry them up and then use a flat-head Phillips screwdriver to remove them completely.
• Next, unplug the power cable from your AV wall outlet (or power brick) and remove it from its socket at this point so that you can access both ends of it—the end with an HDMI port will have one wire coming out; this is where you’ll plug in your new screen replacement cable into when replacing screens on any other devices as well!
• When unplugging cables like these ones for easy replacement purposes only—do not forget about them because they’re very easy to forget about when busy doing other things around home!”

Turn your Apple TV over, so the screen is facing downward on a flat surface.

Turn your Apple TV over, so the screen is facing downward on a flat surface.

Use a clean, dry cloth to gently wipe away any dust or debris from the screen.

If there are smudges or marks on your TV’s display panel (front), use an eraser to remove them.

Using your screwdriver, remove the screws from the bottom of your Apple TV. Set them aside for later reassembly.

Oops! Click Regenerate Content below to try generating this section again.

Carefully pry open the shell of your Apple TV, using the screwdriver if necessary to hold it open sufficiently to complete the next step.

• Carefully pry open the shell of your Apple TV, using the screwdriver if necessary to hold it open sufficiently to complete the next step.
• If you have a small flathead screwdriver handy, use it to pry apart the two halves at their seam and then pull out each half separately. Be careful not to damage either part as they come apart!

Remove the current screen from your shell and replace it with your new one. It should be very easy to do so at this point.

• Remove the current screen from your shell and replace it with your new one. It should be very easy to do so at this point.
• Use a screwdriver to remove the screws that secure your Apple TV case. These can be found on either side of the device, near where you connect an HDMI cable (the connector for video output). Set these aside so that they’re not lost in any other parts of your system remains when you’re finished working on them
• Pry open the shell of your Apple TV using another pair of pliers or similar tools—don’t worry about damaging anything inside; if there’s something inside that looks fragile or might break easily, leave it alone! You’ll only need access to those components within reach anyway (like any ribbon cables connecting ports) once we’re done installing everything else back into place later on…

Reinstall the rubber feet on the bottom of your device and enjoy!

When you’re finished, your Apple TV will be as good as new! Just put the rubber feet back on the bottom of your device and reinstall the screws. Then, reassemble the shell by putting together everything else again except for the screen. Finally, turn on your device and enjoy watching some Netflix or a movie!

If you still have questions about replacing a cracked or broken screen at home or work (or anywhere else), don’t hesitate to reach out to us through our contact form below!

Be careful when working around small parts such as screws or wires so you don’t damage them or lose them!

Be careful when working around small parts such as screws or wires so you don’t damage them or lose them!

• Do not touch the screen itself, as it may be extremely fragile and could break if touched.
• Do not use a metal tool to remove the screws from the back of your Apple TV. Instead, use something plastic like a credit card or paperclip that won’t scratch up your glass-covered display. If you do accidentally manage to damage any part of your device (or yourself), don’t worry—you can still take care of any repairs by following our guide below!

Conclusion:

You’ve just replaced your Apple TV screen! Now you’re ready to enjoy watching movies or shows again on your new device. This video shows you how to replace your Apple TV screen. You’re going to need a Torx screwdriver and a replacement screen to do it.